Dvr-systems NVR38xx Series Manuel d'utilisateur télécharger pdf (Page 62)

 Channel: select the current camera channel.

 Protocol: select corresponding PTZ protocol(such as PELCOD)

 Address: default address is 1.

 Baud rate: select corresponding baud rate. Default value is 9600.

 Data bits: select corresponding data bits. Default value is 8.

 Stop bits: select corresponding stop bits. Default value is 1.

 Parity: there are three options: odd/even/none. Default setup is none.

Figure 6-48

After completing all the setting please click save button.

In one window display mode, right click mouse (click ―Fn‖ Button in the front panel or click ―Fn‖

key in the remote control).

Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 6-49.

Here you can set the following items:

 Step: value ranges fro 1 to 8.

 Zoom

 Focus

 Iris

Please click icon and to adjust zoom, focus and iris.

Figure 6-49

In Figure 6-49, please click direction arrows to adjust PTZ position. There are total 8 direction

arrows.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 137 138

Pas de commentaire

Dvr-systems NVR38xx Series Manuel d'utilisateur Page 62