Dvr-systems NVR38xx Series Manuel d'utilisateur télécharger pdf (Page 46)

Figure 6-20

Shortcut settings:

Users can copy the settings of channel A to channel B to achieve the same configuration

effect.E.g. choose channel 1 and click the copy button after relevant settings are done, then

paste to channel3, you can find that the configuration of channel3 is the same as that of

channel1.

Users can save the configuration of each channel respectively or save the configuration

all at once ultimately.

6.6.4 RS232

RS232 interface is shown as below. There are five items. See Figure 6-21.

 Function: There are various devices for you to select. Console is for you to use the COM or

mini-end software to upgrade or debug the program. The control keyboard is for you to

control the device via the special keyboard. Transparent COM (adapter) is to connect to the

PC to transfer data directly. Protocol COM is for card overlay function. Network keyboard is

for you to use the special keyboard to control the device. PTZ matrix is to connect to the

peripheral matrix control.

 Baud rate: You can select proper baud rate.

 Data bit: You can select proper data bit. The value ranges from 5 to 8.

 Stop bit: There are three values: 1/1.5/2.

 Parity: there are five choices: none/odd/even/space mark.

System default setup is:

 Function: Console

 Baud rate:115200

 Data bit:8

 Stop bit:1

 Parity: None

After completing all the setups please click save button, system goes back to the previous menu.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 137 138

Pas de commentaire

Dvr-systems NVR38xx Series Manuel d'utilisateur Page 46