Dvr-systems NVR38xx Series Manuel d'utilisateur télécharger pdf (Page 61)

Camera Masking

When someone viciously masks the lens, or the output video is in one-color due to the

environments light change, the system can alert you to guarantee video continuity. Camera

masking interface is shown as in Figure 6-47.

Tips:

You can enable preset/tour/pattern activation operation when video loss occurs.

Please refer to chapter 4.5.2 motion detection for detailed information.

Note:

In Detect interface, copy/paste function is only valid for the same type, which means you can

not copy a channel setup in video loss mode to camera masking mode.

Figure 6-47

6.6.8 PTZ

Note: All the operations here are based on PELCOD protocol. For other protocols, there might

be a little difference.

Cable Connection

Please follow the procedures below to go on cable connection

 Connect the dome RS485 port to NVR 485 port.

 Connect dome video output cable to NVR video input port.

 Connect power adapter to the dome.

PTZ Setup

Note: The camera video should be in the current screen. Before setup, please check the

following connections are right:

 PTZ and decoder connection is right. Decoder address setup is right.

 Decoder A (B) line connects with NVR A (B) line.

Boot up the NVR, input user name and password.

In the main menu, click setting, and then click Pan/Tilt Control button. The interface is shown

as in Figure 6-48. Here you can set the following items:

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 137 138

Pas de commentaire

Dvr-systems NVR38xx Series Manuel d'utilisateur Page 61