Dvr-systems NVR38xx Series Manuel d'utilisateur télécharger pdf (Page 43)

 Language: System supports various languages: Chinese (simplified), Chinese (Traditional),

English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight

difference maybe found in various series.)

 HDD full: Here is for you to select working mode when hard disk is full. There are two options:

stop recording or rewrite. If current working HDD is overwritten or the current HDD is full while

the next HDD is no empty, then system stops recording, If the current HDD is full and then

next HDD is not empty, then system overwrites the previous files.

 Pack duration: Here is for you to specify record duration. The value ranges from 60 to 120

minutes. Default value is 60 minutes.

 NVR No: When you are using one remote control (not included in the accessory bag) to

control several NVRs, you can give a name to each NVR for your management.

 Video standard: There are two formats: NTSC and PAL.

 Auto logout: Here is for you to set auto logout interval once login user remains inactive for a

specified time. Value ranges from 0 to 60 minutes.

 Startup wizard: Once you check the box here, system will go to the startup wizard directly

when the system restarts the next time. Otherwise, it will go to the login interface.

 Device ID: Please input a corresponding device name here.

Note:

Since system time is very important, do not modify time casually unless there is a must!

Before your time modification, please stop record operation first!

After completing all the setups please click save button, system goes back to the previous menu.

Figure 6-15

Figure 6-16

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 137 138

Pas de commentaire

Dvr-systems NVR38xx Series Manuel d'utilisateur Page 43